E-Mail Server - JUMO mTRON T Operating Manual

14 Configuration – in setup program only
Parameter
Alarm signal
Subject
Contents
NOTE!
E-mail sending should be tested in the course of startup. If there is an error, this leads to an
entry with an error code in the event list of the multifunction panel.
The interface description B 705060.2.0 contains a list of all error codes ("Error codes as in-
teger return values").
14.3.1

E-mail server

NOTE!
The following settings may only be performed by specialists.
Setup dialog
210
Selection/settings
Signal that triggers sending of an e-mail
Inactive
Digital signal
Text (max. 120 characters) for the subject line of the e-mail
Mail subject 01
(For e-mail 1)
Text (max. 120 characters) for the text field of the e-mail
Mail text 01
(For e-mail 1)
Description
No alarm message
Alarm message is triggered by a signal
(high active), which must be selected
from the list of digital signals (digital
selector).
Use or edit text from list
Use or edit text from list