Function Selection - JUMO mTRON T Operating Manual

Symbol
In addition, the communication with the operator (device configuration, inspection of alarm and
event lists, etc.) is performed in the visualization window.
5.1.3

Function selection

(1) Set functions
(3) Function is performed if the user touches
the screen
The functions of the multifunction panel are selected in the function selection area. The sym-
bols in area (2) change depending on the function performed.
The function selection of the normal display is subsequently shown if the vertical diagram (di-
agram display) has been selected.
(1) Device manager
(3) Alarm and event lists
(5) Visualization
(visualization of current data)
(7) Memory display (History)
(9) Channel rotation
(11) Normal display (Home)
NOTE!
If not all functions can be selected, the functions must first be released by changing the con-
figuration. The setup program may be required for this purpose.
Meaning
Comment was entered
Event has occurred
Alarm no longer present (on multifunction panel)
Alarm was reported (on multifunction panel)
Event has occurred (on base unit)
(1)
(3)
(1) (2) (3)
(2)
(2) Variable functions with changing symbols
(4) (5) (6) (7) (8)
(2) Memory manager
(4) Controller
(6) Group selection
(8) Diagram view
(10) Group rotation
5 Operation
(9) (10) (11)
47