General Object Features - JUMO mTRON T Operating Manual

14.6.6

General object features

The description of the general object features applies for all object type for which the parame-
ters in question are available.
The specific object features are described in the following chapters under the corresponding
object type.
Setup dialog
Parameter
Parameter
Type
X position
Y position
Width
Size
Visible
Editable
Send acknowl-
edge
14 Configuration – in setup program only
Selection/settings
Selection from list of object types
0 to 10 to 635
0 to 20 to 403
1 to 50 to 636 (as of system version 02:
452)
1 to 20 to 404 (as of system version 02:
453)
Yes ( ), No ( )
Yes ( ), No ( )
Yes ( ), No ( )
Description
Object type for the process screen
X coordinate of the upper left corner of
the object in the process screen
Y coordinate of the upper left corner of
the object in the process screen
Width of the object
Size of the object
"Yes" releases the display of the object
in the process screen.
"Yes" releases the option for entry in the
process screen (only for input objects).
"Yes" means that an acknowledgement
is sent to the internal PLC following an
entry in the process screen (only for
input objects with a destination vari-
able).
221