Configuring Parameters - JUMO mTRON T Operating Manual

14 Configuration – in setup program only
➥ The parameter can be configured. The settings are significant for the input mask in the user
area.
14.1.1

Configuring parameters

Setup dialog
Parameter
Parameter
Parameter
Name
Limit value min.
Limit value max.
206
Selection/settings
Select the module and – in the selector
below – the process value or configura-
tion parameter.
Use the preset name or touch the ">"
button to enter a different name.
Adopt the preset value or enter a differ-
ent value.
Adopt the preset value or enter a differ-
ent value.
Description
List of all process values and configura-
tion parameters of the entire system
The process values are to be selected
from the central processing unit or the
multifunction panel; the configuration
parameter is to be selected from the
module in question. The selected pro-
cess value or configuration parameter is
available in the user area.
Name of the parameter in the user area
The preset name corresponds to the
designation of the process value or con-
figuration parameter in the list.
Minimum admissible value for entry in
the user area
The preset value corresponds to the
smallest configurable limit and depends
on the data type of the process value or
configuration parameter.
Maximum admissible value for entry in
the user area
The preset value corresponds to the
largest configurable limit and depends
on the data type of the process value or
configuration parameter.