Dedicated Flash Programming Utilities For J-Link; Introduction; Supported Eval Boards - Segger J-Link User Manual

4.3

Dedicated flash programming utilities for J-Link

The SEGGER J-Link comes with dedicated flash programming utilities (DFPU) for a
number of popular Eval boards. These utilities are designed to program a .bin file into
the flash memory of the target hardware, with J-Link. Each dedicated flash program-
ming utility works only with the Eval board it was designed for.
Data
File
PC
4.3.1

Introduction

Using the dedicated flash programming utilities which come with J-Link, is permitted
for development purposes only. As long as the dedicated flash programming tools are
used for development purposes only, no additional license is required. If you want to
use the dedicated flash programming utilities for commercial and production pur-
poses, you need to obtain a license from SEGGER. SEGGER also offers to create ded-
icated flash programming utilities for custom hardware. When starting a dedicated
flash programming utility, a message box appears which tells the user about the pur-
pose of the dedicated flash programming utility:
4.3.2

Supported Eval boards

The list below shows the Eval boards for which dedicated flash programming utilities
have been already developed. Simple flash programming utilities for other, popular
Eval boards are on the schedule.
CPU / MCU
Atmel AT91SAM9263
ST STM32F103RBT6
Toshiba
TMPA910CRXBG
NXP LPC3250
Table 4.4:
J-Link / J-Trace (UM08001)
USB JTAG
Eval board
manufacturer
Cogent
ST Microelectron-
ics
Toshiba
Phytec
Target
CPU
Memory
Eval board
name
Typically 65 MB external
CSB737
NOR flash
Typically 128 KB internal
MB525
flash
Typically 32 MB external
TOPAS910
NOR flash
Typically 32 MB external
PCM-967 NAND flash (ST
NAND256R3A)
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
Flash
Flash memory
89