Settings; Introduction To Settings - Danfoss ECL Comfort 310 Operating Manual

Operating Guide ECL Comfort 310, application A377

5.0 Settings

5.1 Introduction to Settings

Descriptions of settings (parameter's functions) are divided into
groups as used in the ECL Comfort 210 / 296 / 310 controller's
menu structure. Examples: "Flow temperature", "Room limit" and
so on. Each group starts with a general explanation.
The descriptions of each parameter are in numeric order, related to
the parameter's ID numbers. You might come across differences
between the order in this Operating Guide and the ECL Comfort
210 / 296 / 310 controllers.
Some parameter descriptions are related to specific application
subtypes. This means that you might not see the related parameter
in the actual subtype in the ECL controller.
The note "See Appendix ..." refers to the Appendix at the end of
this Operating Guide, where parameter's setting ranges and factory
settings are listed.
The navigation hints (for example MENU > Settings > Return limit
... ) cover multiple subtypes.
64 | © Danfoss | 2017.10
VI.GU.F6.02