Danfoss ECL Comfort 310 Operating Manual page 112

Operating Guide ECL Comfort 310, application A377
Alarm overview, list:
Alarm Description:
no.:
2 Temp. monitor, circuit 1
3 Temp. monitor, circuit 2
4 Temp. monitor, circuit 3
32 T sensor defect
To find the reason for an alarm:
• select MENU
• select 'Alarm'
• select 'Alarm overview' . A "bell" will be shown at the alarm in
question.
Alarm overview (example):
2: Max. temp.
3: Temp. monitor
32: T sensor defect
The numbers in the 'Alarm overview' refer to the alarm number
in the Modbus communication.
To reset an alarm:
When the "bell" is present to the right of the alarm line, place the
cursor at the alarm line in question and press the dial.
To reset alarm 32:
MENU > Common controller settings > System > Raw input
overview: The sensor in question is marked and the alarm can be
reset.
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
112 | © Danfoss | 2017.10
Alarm Sensor A377.1
ref.:
type:
x
1 S3
x
1 S4
x
1 S9
x
2 all
A377.2 A377.3
x x
x x
x x
x x
VI.GU.F6.02