Danfoss ECL Comfort 310 Operating Manual page 4

Operating Guide ECL Comfort 310, application A377
4 | © Danfoss | 2017.10
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
Local legislations must be respected. This comprises also cable
dimensions and type of isolation (double isolated at 230 V).
A fuse for the ECL Comfort installation is max. 10 A typically.
The ambient temperature ranges for ECL Comfort in operation are:
ECL Comfort 210 / 310: 0 - 55 °C
ECL Comfort 296: 0 - 45 °C.
Exceeding the temperature range can result in malfunctions.
Installation must be avoided if there is a risk for condensation (dew).
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
As this Operating Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type' .
°C (degrees Celsius) is a measured temperature value whereas K
(Kelvin) often is used for temperature differences.
The ID no. is unique for the selected parameter.
Example First digit
11174 1
-
1
12174
-
If an ID description is mentioned more than once, it means that there
are special settings for one or more system types. It will be marked
with the system type in question (e.g. 12174 - A266.9).
Second digit Last three digits
1 174
Circuit 1 Parameter no.
174
2
Circuit 2 Parameter no.
VI.GU.F6.02