Schedule - Danfoss ECL Comfort 310 Operating Manual

Operating Guide ECL Comfort 310, application A377

3.7 Schedule

3.7.1 Set your schedule
This section describes the schedule in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application. In some applications, however, there might be more
than one schedule. Additional schedules can be found in 'Common
controller settings' .
The schedule consists of a 7-day week:
M = Monday
= Tuesday
T
W = Wednesday
= Thursday
T
= Friday
F
= Saturday
S
= Sunday
S
The schedule will day-by-day show you the start and stop times of
your comfort periods (heating / DHW circuits).
Changing your schedule:
Purpose:
Action:
Choose 'MENU' in any of the overview
displays
Confirm
Confirm the choice 'Schedule'
Choose the day to change
Confirm*
Go to Start1
Confirm
Adjust the time
Confirm
Go to Stop1, Start2 etc. etc.
Return to 'MENU'
Confirm
Choose 'Yes' or 'No' in 'Save'
Confirm
* Several days can be marked
The chosen start and stop times will be valid for all the chosen days
(in this example Thursday and Saturday).
You can set max. 3 comfort periods a day. You can delete a comfort
period by setting start and stop times to the same value.
VI.GU.F6.02
Examples:
Each circuit has its own schedule. To change to another circuit, go to
'Home' , turn the dial and choose the desired circuit.
The start and stop times can be set in half-hourly (30 min. ) intervals.
© Danfoss | 2017.10 | 61