Danfoss ECL Comfort 310 Operating Manual page 143

Operating Guide ECL Comfort 310, application A377
Example 1
ECL in Saving mode, but in Comfort mode at override.
Choose an unused input, for example S8. Connect the override
switch or override relay contact.
Settings in ECL:
1. Select circuit > MENU > Settings > Application > Ext. input:
Select the input S8 (the wiring example)
2. Select circuit > MENU > Settings > Application > Ext. mode:
Select COMFORT
3. Select circuit > MENU > Schedule:
Select all weekdays
Set "Start1" to 24.00 (this disables Comfort mode)
Exit menu and confirm by "Save"
4. Remember to set the circuit in question in scheduled mode
("clock").
Result: When the override switch (or the relay contact) is ON, the
ECL 210 / 296 / 310 will operate in Comfort mode.
When the override switch (or the relay contact) is OFF, the ECL 210 /
296 / 310 will operate in Saving mode.
Example 2
ECL in Comfort mode, but in Saving mode at override.
Choose an unused input, for example S8. Connect the override
switch or override relay contact.
Settings in ECL:
1. Select circuit > MENU > Settings > Application > Ext. input:
Select the input S8 (the wiring example)
2. Select circuit > MENU > Settings > Application > Ext. mode:
Select SAVING
3. Select circuit > MENU > Schedule:
Select all weekdays
Set "Start1" to 00.00
Set "Stop1" to 24.00
Exit menu and confirm by "Save"
4. Remember to set the circuit in question in scheduled mode
("clock").
Result: When the override switch (or the relay contact) is ON, the
ECL 210 / 296 / 310 will operate in Saving mode.
When the override switch (or the relay contact) is OFF, the ECL 210
/ 296 / 310 will operate in Comfort mode.
VI.GU.F6.02
# 1 # = Override switch or relay contact (not activated / activated)
# 2 # = Function mode (Schedule / Comfort)
# 3 # = Time
# 1 # = Override switch or relay contact (not activated / activated)
# 2 # = Function mode (Schedule / Saving)
# 3 # = Time
© Danfoss | 2017.10 | 143