Danfoss ECL Comfort 310 Operating Manual page 63

Operating Guide ECL Comfort 310, application A377
Setting
Cont. T control
Circ. P priority
Supply T mon.
P charge delay (Charging pump, delayed start)
Flow T adapt time (Flow temperature, adaptation time)
Circ. P frost T
P frost T (circulation pump, frost protection temp.)
P heat T (heat demand)
Priority (priority for return temp. limitation)
Frost pr. T (frost protection temp.)
Input type
Limit (limitation value)
Adapt. time (adaptation time)
Filter constant
Units
High limit Y2 (flow / power limitation, high limit, Y-axis)
Low limit Y1 (flow / power limitation, low limit, Y-axis)
Low T out X2 (flow / power limitation, low limit, X-axis)
High T out X1 (flow / power limitation, high limit, X-axis)
Ext. input (external override)
Ext. mode (external override mode)
Upper difference
Lower difference
Delay, example
Lowest temp.
Max. charge T (maximum heating / charging temperature)
Motor pr. (motor protection)
Temp. min.
Temp. max.
Summer, cut-out (limit for heating cut-out)
Infl. - max. (room temp. limitation, max.)
Infl. - min. (room temp. limitation, min.)
Xp (proportional band)
Tn (integration time constant)
M run (running time of the motorized control valve)
Nz (neutral zone)
Min. act. time (min. activation time gear motor)
Charge difference
Stop difference
Start difference
Send desired T
VI.GU.F6.02
ID Page
1
1x054 96
1x055 96
1x056 97
1x059 97
1x068 106
1x076 97
1x077 98
1x078 98
1x085 77
1x093 98
1x109 79
1x111 79
1x112 80
1x113 80
1x115
80
1x116 80
1x117 81
1x118 81
1x119 81
1x141 98
1x142 99
1x147 112
1x148 113
1x149 113
1x150 114
1x152 106
1x174 90
1x177 67
1x178 67
1x179 87
1x182 69
1x183 70
1x184 91
1x185 91
1x186 91
1x187 91
1x189 92
1x193 106
1x194 107
1x195 109
1x500 101
Factory settings in circuit(s)
2
© Danfoss | 2017.10 | 63
3