Danfoss ECL Comfort 310 Operating Manual page 14

Operating Guide ECL Comfort 310, application A377
Advice for settings:
Factory settings in the subtypes will run the most application
examples. Some of the application examples need change of
dedicated settings.
See the documentation for applications and subtypes, delivered
with the application key.
A377.1, ex. a
A377.1, ex. d
A377.3, ex. a
A377.3, ex. b
DHW circulation pipe can be connected to the DHW tank at 'A'
for internal circulation or to the heat-exchanger at 'B' for external
circulation.
Issue:
DHW circuit (3):
Internal DHW circulation
DHW circuit (3):
External DHW circulation
A377.1, ex. b
A377.1, ex. c
Circuit 1 must be able to receive the heat demand from circuit 2.
Issue:
Heating circuit (1):
Heat demand
* This value is added to the heat demand value from circuit 2.
Circuit 2 must be able to send the heat demand to circuit 1.
Issue:
Heating circuit (2):
Heat demand
DHW circulation pipe can be connected to the DHW tank at 'A'
for internal circulation or to the heat-exchanger at 'B' for external
circulation.
Issue:
DHW circuit (3):
Internal DHW circulation
DHW circuit (3):
External DHW circulation
14 | © Danfoss | 2017.10
Navigation:
MENU \ Settings \ Application: 'Cont. T control'
MENU \ Settings \ Application: 'Cont. T control'
Navigation:
MENU \ Settings \ Application: 'Demand offset'
Navigation:
MENU \ Settings \ Application: 'Send desired T'
Navigation:
MENU \ Settings \ Application: 'Cont. T control'
MENU \ Settings \ Application: 'Cont. T control'
ID no.:
Recommended
setting:
13054 OFF
13054 ON
ID no.: Recommended
setting:
11017 3 K*
ID no.:
Recommended
setting:
12500 ON
ID no.: Recommended
setting:
13054
OFF
13054
ON
VI.GU.F6.02