Schedule Function - Danfoss ADAP-KOOL AK-HP 780 Design Manual

Schedule function

1. Go to Configuration menu
2. Select schedule
3. Setup schedule
AK-HP 780 Heat pump controller RS8GF202 © Danfoss 2015-08
Before regulation is started we will set the schedule function for the
night setback of the reference.
In other cases where the controller is installed in a network with one
system unit, this setting may be made in the system unit which will then
transmit a day/night signal to the controller.
Press a weekday and set the time for the day period.
Continue with the other days.
A complete weekly sequence is shown in the display.
71