System Manual
No.
E
F
8.4.2 Viewing Fault Information
Step 1
Click "Overview" → "General Information" on the left navigation bar to enter the
homepage.
Step 2 Click
in the upper-right corner of the interface to view information such as the name and
time of the fault event.
- - End
8.4.3 Viewing Alarm Information
Step 1 Click "Overview" → "General Information" on the left navigation bar to enter the
homepage.
Step 2 Click
in the upper-right corner of the interface to view information such as the name and
time of the fault event.
- - End
8.4.4 Boot/Shutdown
Step 1 Click "Overview" → "General Information" on the left navigation bar to enter the
homepage.
Step 2 Click Boot or Shutdown in the Shortcut Menu. Taking SG8800UD as an example.
•
If an inverter unit needs to be started, e. g., Unit 1, check SG8800UD_Unit1 and click
Save to turn on the unit. If the whole inverter needs to be started, check the inverter mod-
el, e.g., SG8800UD and click Save to turn on the inverter.
•
If an inverter unit needs to be shut down, e.g., Unit 1, check SG8800UD_Unit1 and click
Save to shut down the unit. If the whole inverter needs to be shut down, check the inver-
ter model, e.g., SG8800UD and click Save to shut down the inverter.
- - End
8.4.5 Setting Initial Parameters
Step 1 Click "Device Monitoring" in the left navigation bar.
Step 2 Pull down "Country /Region" to set according to the product location, and pull down
"Machine Choose" to set according to the actual product model. Click "Settings" to
complete the initial parameter setting.
The above parameters have been configured before the product leaves the
factory.
- - End
Description
Language switching options
User center
8 O&M on WEB
61