Time Set; Sd Card; Others - Icom ic-7300 Full Manual

12
SET MODE

Time Set

Dmte
Sets the date (Year/Month/Day).
(The day of the week is automatically set.)
• Range: Year 2000 ~ 2099, Month/Day 1-1 ~ 12-31
Time
Sets the current time.
(The time is displayed in the 24 hour format.)
• Sets the current time.
UTC Onnset
Sets the UTC offset time.
• Range: –14:00 to +14:00 (in 5 minute steps)
SD Cmrd
Lomd Setting
Selects the saved data file to load.
L See "Loading the saved data files onto an SD card"
(p. 8-6) for details.
Smve Setting
Saves the setting data onto an SD card.
L See "Saving the setting data onto an SD card"
(p. 8-4) for details.
SD Cmrd Inno
Displays the SD card capacity and the time remaining
for voice recording.
L See "Displaying the information" (p. 8-7) for details.
Screen Cmpture View
Displays the selected screen capture.
L See "Screen Capture function" (p. 13-5) for details.
Firmwmre Updmte
Displays the Firmware Update mode.
L See "Updating the firmware" (p. 15-5) for details.
Formmt
Formats the SD card.
If you use a brand new SD card, be sure to format it.
L See "Formatting an SD card" (p. 8-3) for details.
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it.
Otherwise the data may be corrupted or deleted.
L See "Unmounting an SD card" (p. 8-3) for details.
(Default: 2000/01/01)
(Default: 0:00)
(Default: ± 0:00)
12-11

Others

Version
Displays the transceiver firmware's version number.
Touch Screen Cmlibrmtion
Touch to adjust the touch screen.
L See "Touch screen calibration function" (p. 14-3) for
details.
Pmrtiml Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents) without
clearing the items below:
• Memory channel contents
• MY Call
• Memory Keyer
• RTTY memory
• User Band Edge
• REF Adjust
• Fixed Edges
L See "Resetting" (p. 14-4) for details.
All Reset
Clears all data and returns all settings to their factory
defaults.
Memory channel contents, filter setting and so on
will all be cleared, so you will need to rewrite your
operating settings.
L See "Resetting" (p. 14-4) for details.
Emergency
Sets the Emergency function.
This function enables you to use the internal antenna
tuner in an emergency situation, but limits the
maximum output power to 50 W.
L See "Emergency mode (Tuner)" (p. 11-4) for details.