Figure 37: Attached Rail With Threaded Cables - Top View; Figure 38: Sliding The Frame Sliders Into The Rails - Mellanox Technologies Spectrum SN2700 Hardware User Manual

Slide the two frame slides into the dedicated rails in the metal frame. See
Step 5.
Place the frame in the cabinet, and install ten cage nuts in the desired 1U slots of the rack:
Step 6.
three cage nuts in the front part of each cabinet post, and two cage nuts in the rear part of
each cabinet post.
Rev 1.9

Figure 37: Attached Rail with Threaded Cables - Top View

Figure 38: Sliding the Frame Sliders into the Rails

Mellanox Technologies
Installation
Figure 38.
43