While holding the cables stably together in the blade's rail with one hand, use your other
Step 4.
hand to secure the blades to the chassis. Screw the right blade with eight 4-40 flathead
screws, and the left blade with seven 4-40 flathead screws. The recommended torque is
0.49-0.54 Nm.
42
Figure 35: Cables within the Rail
In the next you will be attaching the rails to the chassis, before doing that, make sure
the cables are laid properly within them. Avoid using excessive pressure, as it can
damage the cables.
Figure 36: Attach the Blades to the System
Mellanox Technologies
Rev 1.9