Power Off The Server Module (Emergency Shutdown); Prepare The Server Module For Removal - Sun Oracle SPARC T3-1B Service Manual

"Prepare the Server Module for Removal" on page 58
■
▼ Power Off the Server Module (Emergency
Shutdown)
Caution – All applications and files will be closed abruptly without saving changes.
File system corruption might occur.
●
Press and hold the Power button for four seconds.
Use a stylus or the tip of a pen to operate this button.
Related Information
"Shut Down the Oracle Solaris OS" on page 56
■
"Power Off the Server Module (Power Button - Standby Mode)" on page 57
■
"Prepare the Server Module for Removal" on page 58
■

▼ Prepare the Server Module for Removal

1. Log in to Oracle ILOM on the server module you plan to remove.
2. Ensure the server module is in standby mode, with the host powered off. Type:
-> show /SYS/ power_state
/SYS
properties:
power_state = Off
If you do not see this message, check that you have performed all the steps in
"Shut Down the Oracle Solaris OS" on page 56
3. Type:
-> set /SYS/ prepare_to_remove_action=true
Set 'prepare_to_remove_action' to 'true'
The server module is in standby mode. Power is removed from the host while
standby power is applied to the SP.
58 SPARC T3-1B Server Module Service Manual • July 2012