Table of Contents
Advertisement
3. Lift the ID PROM (1) straight up from its socket (2).
Place the ID PROM on an antistatic mat.
4. Install the ID PROM.
See
Related Information
"Install the ID PROM" on page 98
■
"Verify the ID PROM" on page 99
■
▼ Install the ID PROM
1. (If needed) Remove the ID PROM.
See
2. Locate the ID PROM socket on the motherboard.
98
SPARC T3-1B Server Module Service Manual • July 2012
"Install the ID PROM" on page
"Remove the ID PROM" on page
98.
97.
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T3-1B and is the answer not in the manual?
Questions and answers