Tools Needed For Service; Find The Modular System Serial Number - Sun Oracle SPARC T3-1B Service Manual

Related Information
"Returning the Server Module to Operation" on page 111
■

Tools Needed for Service

The following tools are required for service procedures:
Antistatic wrist strap
■
Antistatic mat
■
Stylus or pencil (to operate the power button)
■
UCP-3 dongle (UCP-4 dongle can be used, but see instructions in the SPARC T3-1B
■
Server Module Installation Guide)
Blade filler panel
■
Related Information
"General Safety Information" on page 51
■
▼ Find the Modular System Serial
Number
To obtain support for your server module, you need the serial number of the Sun
Blade 6000 modular system in which the server module is located, not the serial
number of the server module. The serial number of the modular system is provided
on a label on the upper left edge of the front bezel.
Use the following procedure to obtain the serial number remotely.
1. Log in to the CMM of the modular system.
See the documentation for the Sun Blade 6000 modular system.
2. Type
-> show /CH
Preparing for Service 53