Returning The Server Module To Operation; Replace The Cover - Sun Oracle SPARC T3-1B Service Manual

Returning the Server Module to
Operation
The following topics describe hot to return the server module to operation after
removing it from the modular system for service:
"Replace the Cover" on page 111
■
"Install the Server Module Into the Modular System" on page 112
■
"Start the Server Module Host" on page 114
■
Related Information
"Preparing for Service" on page 51
■

▼ Replace the Cover

Perform this task after completing installation or servicing of components inside the
server module.
1. Set the cover on the server module (panel 1).
The cover edge hangs over the rear of the server module by about half an inch (1
cm).
111