Sun Oracle SPARC T3-1B Service Manual page 28

3. Log in to Oracle ILOM.
The default Oracle ILOM login account is root with a default password of
changeme.
Example of logging in to the Oracle ILOM CLI:
ssh root@xxx.xxx.xxx.xxx
Password:
Waiting for daemons to initialize...
Daemons ready
Oracle (R) Integrated Lights Out Manager
Version 3.0.12.1 r57146
Copyright (c) 2010, Oracle and/or its affiliates, Inc. All rights reserved.
Warning: password is set to factory default.
->
The Oracle ILOM -> prompt indicates that you are accessing the SP with the
Oracle ILOM CLI.
4. Perform Oracle ILOM commands that provide the diagnostic information you
need.
The following Oracle ILOM commands are commonly used for fault management:
■
■
Note – You can use fmadm faulty in the Oracle ILOM faultmgmt shell as an
alternative to show faulty.
■
Related Information
Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide
■
"Display FRU Information (show Command)" on page 17
■
"Check for Faults (show faulty Command)" on page 18
■
"Check for Faults (fmadm faulty Command)" on page 20
■
"Clear Faults (clear_fault_action Property)" on page 21
■
"Service-Related Oracle ILOM Command Summary" on page 21
■
16 SPARC T3-1B Server Module Service Manual • July 2012
show command – Displays information about individual FRUs.
See "Display FRU Information (show Command)" on page
show faulty command – Displays environmental, POST-detected, and
PSH-detected faults.
See "Check for Faults (show faulty Command)" on page
clear_fault_action property of the set command – Manually clears
PSH-detected faults.
See "Clear Faults (clear_fault_action Property)" on page
17.
18.
21.