List Fru Status (Prtdiag Command); Managing Faults (Oracle Solaris Psh) - Sun Oracle SPARC T3-1B Service Manual

▼ List FRU Status (prtdiag Command)

●
From an Oracle Solaris OS command line, run the prtdiag command.
FRU status information is displayed.
Example:
# prtdiag
System Configuration:
Memory size: 130560 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation
------ --------- ---------------------- -------
0 1649 MHz
1 1649 MHz
<...>
<...>
============================ FRU Status =======================
All FRUs are enabled.
Related Information
"Check the Message Buffer (dmesg Command)" on page 24
■
"View the System Message Log Files" on page 24
■
"Display FRU Information (show Command)" on page 17
■

Managing Faults (Oracle Solaris PSH)

The following topics describe the Oracle Solaris PSH feature:
"Oracle Solaris PSH Technology Overview" on page 26
■
"PSH-Detected Fault Example" on page 27
■
"Check for PSH-Detected Faults" on page 28
■
"Clear PSH-Detected Faults" on page 30
■
Related Information
"Diagnostics Overview" on page 5
■
"Diagnostics Process" on page 7
■
Sun Microsystems
SPARC-T3
SPARC-T3
sun4v SPARC T3-1B
Status
on-line
on-line
Detecting and Managing Faults 25