Table of Contents
Advertisement
3. Rotate the card up and off the retainer (panels 2 and 3).
4. Place the removed FEM on an antistatic mat.
5. Install a FEM.
See
Related Information
"Install a FEM" on page 90
■
▼ Install a FEM
This procedure applies to any of the form factors of FEM cards that are supported by
this server module.
1. Prepare for service by performing the following tasks:
■
90
SPARC T3-1B Server Module Service Manual • July 2012
"Install a FEM" on page
"Shut Down the Oracle Solaris OS" on page 56
90.
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T3-1B and is the answer not in the manual?
Questions and answers