Table of Contents
Advertisement
/HOST
Properties:
macaddress = 00:21:28:34:29:9c
2. Display the host ID.
Example using the Solaris hostid command:
# hostid
857f6844
3. Display the Ethernet address.
Example using the Solaris ifconfig command:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index
inet 10.6.91.117 netmask fffffe00 broadcast 10.6.91.255
ether 0:21:28:7f:68:44
#
Related Information
"Remove the ID PROM" on page 97
■
"Install the ID PROM" on page 98
■
100
SPARC T3-1B Server Module Service Manual • July 2012
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T3-1B and is the answer not in the manual?
Questions and answers