Display Fru Information (Show Command) - Sun Oracle SPARC T3-1B Service Manual

"Oracle ILOM Properties That Affect POST Behavior" on page 33
■

▼ Display FRU Information (show Command)

Use the Oracle ILOM show command to display information about individual FRUs.
●
At the -> prompt, enter the show command.
In the following example, the show command displays information about a
memory module.
-> show /SYS/MB/CMP0/BOB0/CH0/D0
/SYS/MB/CMP0/BOB0/CH0/D0
Targets:
T_AMB
SERVICE
Properties:
Type = DIMM
ipmi_name = B0/C0/D0
component_state = Enabled
fru_name = 2048MB DDR3 SDRAM
fru_description = DDR3 DIMM 2048 Mbytes
fru_manufacturer = Samsung
fru_version = 0
fru_part_number = ****************
fru_serial_number = ******************
fault_state = OK
clear_fault_action = (none)
Commands:
cd
set
show
Related Information
"Diagnostics Process" on page 7
■
"Access the SP (Oracle ILOM)" on page 15
■
"Check for Faults (show faulty Command)" on page 18
■
"Check for Faults (fmadm faulty Command)" on page 20
■
"Clear Faults (clear_fault_action Property)" on page 21
■
"Service-Related Oracle ILOM Command Summary" on page 21
■
Detecting and Managing Faults 17