Access Control List; Ipv4 Acl Commands - Planet VC-820M User Manual

6.16 Access Control List

Packets forwarded or dropped by ACL rules include IPv4 or non-IPv4. The Managed Switch can be used to block packets
by maintaining a table of packet fragments indexed by source and destination IP address, protocol, and so on

6.16.1 IPv4 ACL commands

no acl
Description:
Delete ACL group.
Syntax:
no acl <1-220>
Parameters:
<1-220> specifies the group ID.
e.g. no acl 1
no acl count
Description:
Reset the ACL group count.
Syntax:
no acl count <Group ID>
Parameters:
Group ID: <1-220> specifies the group ID.
show acl
Description:
Show ACL group information.
Syntax:
show acl [<1-220>]
Parameters:
<1-220> specifies the group ID, null means all valid groups.
e.g.
Switch(config)# show acl 1
Group Id : 1
-------------------------------
Action : Permit
Rules:
Vlan ID : Any
IP Fragement : Uncheck
Src IP Address : Any
Dst IP Address : Any
L4 Protocol : Any
195
User's Manual of VC-820M