Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
l
l
----End
7.9.3 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Check information about the
observing port.
Check information about MAC
address mirroring.
If the following results are obtained, the configuration is successful:
Issue 01 (2011-07-15)
An RSPAN VLAN is created and the RSPAN VLAN view is displayed.
3.
Run:
mac-address learning disable
The MAC address learning is disabled.
NOTE
If MAC address learning is disabled in the VLAN, other services cannot be configured in the VLAN.
4.
Run:
quit
Return to the system view.
5.
Run:
observe-port index interface interface-type interface-number [ vlan vlan-
id ]
An observing port is configured, and the RSPAN VLAN is specified.
6.
Run:
vlan vlan-id
The view of the VLAN that the observed MAC address belongs to is displayed.
7.
Run:
mac-mirroring mac-address to observe-port index inbound
Remote MAC address mirroring is configured and the RSPAN VLAN is specified.
To observe incoming packets from or destined for multiple MAC addresses, repeat
Step 6
and
Step
7.
Configure the RSPAN VLAN on the intermediate switch and add interfaces to the RSPAN
VLAN.
The configuration is the same as that for remote port mirroring. For details, see
Configuring Remote Port
Configure the remote observing port on the destination switch.
The configuration is the same as that for remote port mirroring. For details, see
Configuring Remote Port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mirroring.
Mirroring.
Command
display observe-port
display port-mirroring
7 Mirroring
7.3.2
7.3.2
83
Advertisement
Table of Contents
