Configuration Examples; Example For Configuring The Information Center - Huawei V100R006C00 Configuration Manual

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
Statistics cannot be restored after being cleared. So, confirm the action before you run the
command.
Action
Clear the statistics in the
information center.
Clear the information in the log
buffer.
Clear the information in the trap
buffer.

6.5 Configuration Examples

This section provides examples for configuring the information center.

6.5.1 Example for Configuring the Information Center

Networking Requirements
Figure 6-4 Networking of sending logs to the log host
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2011-07-15)
CAUTION
Switch
VLANIF10
2.0.0.1/8
Enable the information center.
Configure the information channel to ensure that the S5700 can correctly send logs to the
log host. Disable the sending of the traps and debugging information to the log host.
Configure the log host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
Command
reset info-center statistics
reset logbuffer
reset trapbuffer
Log Host
Network
1.0.0.1/8
61