Canceling Flow Mirroring; Establishing The Configuration Task - Huawei V100R006C00 Configuration Manual

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
Action
Check information about the
observing port.
Check information about port
mirroring.
Check the configuration of flow
mirroring in the traffic policy on
an interface.
If the following results are obtained, the configuration succeeds:
l
l
l
l
l

7.13 Canceling Flow Mirroring

This section describes how to cancel flow mirroring.

7.13.1 Establishing the Configuration Task

Applicable Environment
When flow mirroring is enabled and the flow, with the same attributes, passing through the
S5700 does not need to be monitored, you can cancel flow mirroring.
Pre-configuration Tasks
None.
Data Preparation
To cancel flow mirroring, you need the following data.
No.
1
2
Issue 01 (2011-07-15)
The number of the observing port is configured properly.
The type of the observing port is configured properly.
The RSPAN VLAN is configured properly.
A proper traffic policy is applied to the interface where incoming flows need to be
monitored.
The traffic policy contains a proper traffic classifier and a traffic behavior, and the traffic
behavior contains the flow mirroring action.
Data
Type and number of the interface where flow mirroring needs to be cancelled
Name of the traffic policy
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
display observe-port
display port-mirroring
display traffic policy interface [ interface-type
interface-number ] [ inbound ]
7 Mirroring
90