Huawei V100R006C00 Configuration Manual page 61

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
Channel
Number
3
4
5
6
7
8
9
When multiple log hosts are configured, you can configure logs to be output to different log
hosts through one channel or several channels. For example, configure parts of logs to be output
to a log host either through Channel 2 (loghost) or through Channel 6. You can also change the
name of Channel 6 for managing channel conveniently.
Format of Logs
Syslog is a sub-function of the information center. It outputs information to a log host through
port 514.
Figure 6-2
Figure 6-2 Format of the output logs
Table 6-3
Table 6-3 Description of each field in the format of logs
Field
<Int_16>
Issue 01 (2011-07-15)
Default
Channel Name
Trapbuffer
Logbuffer
Snmpagent
Unspecified
Unspecified
Unspecified
Unspecified
shows the format of logs.
<Int_16>TIMESTAMP HOSTNAME %%ddAAA/B/CCC(l):slot=XXX; YYYY
describes each field in the log format.
Indication
Leading character
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
Output Description
Direction
Trap buffer Outputs information to the trap buffer that
can receive traps. An area is specified inside
a device as the trap buffer to record traps.
Log buffer Outputs information to the log buffer area
that can receive logs. The switch assigns a
specified area in itself to be the log buffer
area that can record the information.
SNMP agent Outputs information to the SNMP agent that
can receive alarms.
Unspecified Reserved.
Unspecified Reserved.
Unspecified Reserved.
Unspecified Reserved.
Description
Before logs are output to log hosts, leading
characters are added.
Logs saved in the local device do not contain
leading characters.
52