Canceling Mirroring Based On Mac Addresses; Establishing The Configuration Task - Huawei V100R006C00 Configuration Manual

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
l
l
l

7.10 Canceling Mirroring Based on MAC Addresses

This section describes how to cancel mirroring based on MAC addresses.

7.10.1 Establishing the Configuration Task

Applicable Environment
When mirroring based on MAC addresses is enabled and incoming packets with specified MAC
addresses in this VLAN do not need to be monitored on the S5700, or before deleting or changing
the bound observing port, you need to cancel mirroring based on MAC addresses.
Pre-configuration Tasks
None.
Data Preparation
To cancel mirroring based on MAC addresses, you need the following data.
No.
1
7.10.2 Canceling Mirroring Based on MAC Addresses
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The view of the VLAN that monitored MAC address belongs to is displayed.
Step 3 Run:
undo mac-mirroring mac-address inbound
Mirroring based on MAC addresses is canceled.
----End
Issue 01 (2011-07-15)
The type of the observing port is configured properly.
The RSPAN VLAN is configured properly.
The number of the observing port is configured properly.
Data
MAC address of the mirrored packet to be deleted
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Mirroring
84