Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
l
Issue 01 (2011-07-15)
Return to the system view.
4.
Run:
interface interface-type interface-number
The view of the interface connected to the source switch or destination switch is
displayed.
5.
Run:
port link-type trunk
The interface is configured as a trunk interface.
6.
Run:
port trunk allow-pass vlan vlan-id
The interface is added to the RSPAN VLAN.
7.
Run:
quit
Return to the system view.
Configure the remote observing port on the destination switch.
1.
Run:
system-view
The system view is displayed.
2.
Run:
vlan vlan-id
The RSPAN VLAN is created and the RSPAN VLAN view is displayed.
3.
Run:
quit
Return to the system view.
4.
Run:
interface interface-type interface-number
The view of the interface connected to the intermediate switch is displayed.
NOTE
If no intermediate switch exists, you enter the view of the interface connected to the source
switch.
5.
Run:
port link-type trunk
The interface is configured as a trunk interface.
6.
Run:
port trunk allow-pass vlan vlan-id
The interface is added to the RSPAN VLAN.
7.
Run:
interface interface-type interface-number
The observing port view is displayed.
8.
Run:
port hybrid untagged vlan vlan-id
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Mirroring
73
Advertisement
Table of Contents
