Checking The Configuration; Canceling Port Mirroring; Establishing The Configuration Task - Huawei V100R006C00 Configuration Manual

Table of Contents

Quidway S5700 Series Ethernet Switches

Configuration Guide - Device Management

----End

7.3.3 Checking the Configuration

Run the following commands to check the previous configuration.

Action

Check information about the

observing port.

Check information about port

mirroring.

If the following results are obtained, the configuration is successful:

This section describes how to cancel port mirroring.

Applicable Environment

When port mirroring is enabled on an interface of the S5700, and the incoming or outgoing

packets passing through this interface do not need to be monitored, you can cancel port mirroring

on that interface. You must cancel port mirroring on the bound observing port before deleting

this observing port.

Pre-configuration Tasks

None.

Data Preparation

To cancel port mirroring, you need the following data.

Issue 01 (2011-07-15)

The observing port is configured as a hybrid interface and it allows packets of the

RSPAN VLAN to pass.

Run:

quit

Return to the system view.

The RSPAN VLAN is configured properly.

The number of the observing port is configured properly.

The type of the observing port is configured properly.

The number of the mirrored port and the mirroring direction are configured properly.

Huawei Proprietary and Confidential

Command

display observe-port

display port-mirroring

7 Mirroring

Table of Contents