Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
l
Issue 01 (2011-07-15)
1.
Run:
system-view
The system view is displayed.
2.
Run:
vlan vlan-id
An RSPAN VLAN is created and the RSPAN VLAN view is displayed.
3.
Run:
mac-address learning disable
The MAC address learning is disabled.
NOTE
If MAC address learning is disabled in the VLAN, other services cannot be configured in the VLAN.
4.
Run:
quit
Return to the system view.
5.
Run:
observe-port index interface interface-type interface-number [ vlan vlan-
id ]
An observing port is configured, and the RSPAN VLAN is specified.
6.
Run:
interface interface-type interface-number
The view of the mirrored port is displayed.
7.
Run:
port-mirroring to observe-port index { both | inbound | outbound }
Remote port mirroring is configured.
To observe incoming and outgoing packets on multiple interfaces, repeat
Step
7.
Configure the RSPAN VLAN and add the interfaces connected to the source switch and
destination switch to the RSPAN VLAN.
NOTE
The mirrored port cannot be added to the RSPAN VLAN.
Do as follows on the intermediate switch. The configurations on the interfaces connected
to the source switch and destination switch are similar. If no intermediate switch exists,
skip this step.
1.
Run:
system-view
The system view is displayed.
2.
Run:
vlan vlan-id
The RSPAN VLAN is created and the RSPAN VLAN view is displayed.
3.
Run:
quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Mirroring
Step 6
and
72
Advertisement
Table of Contents
