Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
7.12.1 Establishing the Configuration Task
Applicable Environment
When incoming flows passing through the S5700 with the same attribute need to be monitored,
you can configure remote flow mirroring if the monitored interface receiving these incoming
flows is not located on the same S5700 as the observing port.
Pre-configuration Tasks
None.
Data Preparation
To configure remote flow mirroring, you need the following data.
No.
1
2
3
4
7.12.2 Setting Traffic Classification Rules
Context
For how to configure traffic classification rules, see
Rules.
7.12.3 Configuring Remote Flow Mirroring
Procedure
l
Issue 01 (2011-07-15)
NOTE
S5700SI does not support remote flow mirroring.
Data
Type and number of the observing port
Type and number of the flow mirroring interface
Names of the traffic classifier, traffic behavior, and traffic policy
ID of the RSPAN VLAN
Configure remote flow mirroring on the source switch.
NOTE
The mirrored port cannot be added to the RSPAN VLAN.
The S5700SI series do not support remote flow mirroring.
1.
Run:
system-view
The system view is displayed.
2.
Run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.11.2 Configuring Traffic Classification
7 Mirroring
88
Advertisement
Table of Contents
