Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
No.
1
5.4.2 Enabling Electrical Port Sleep
To save energy on a device, you can enable electrical port sleep on the device.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface { interface-type interface-number }
The interface view is displayed.
Step 3 Run:
port-auto-sleep enable
Electrical port sleep is enabled.
By default, the sleep function is disabled on an Ethernet port.
----End
5.4.3 Checking the Configuration
After enabling electrical port sleep, you can run the following command to check the
configuration.
Procedure
l
l
l
----End
Issue 01 (2011-07-15)
Data
Number of the electrical port where the sleep function is to be enabled
Run:
system-view
The system view is displayed.
Run:
interface { interface-type interface-number }
The interface view is displayed.
Run:
display this
Check whether port sleep is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Management
47