Operator Controls And Displays; Front-Sided Control Elements And Displays - Siemens SIMATIC KP8 Operating Instructions Manual

Operator controls and displays

5.1

Front-sided control elements and displays

Controls
Display elements
There are 8 light buttons on the front of the HMI device. The corresponding bit in the
controller is set as long as the key is pressed.
Surface LEDs are integrated in each key. They can be used to represent bit states of the
connected controller. The LEDs can be displayed in red, green, yellow, blue and white.
The brightness of the LEDs can be set - see chapter "Setting controller - communication HMI
device (Page 58)". The default setting is "normal".
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
5
53