Setting Up The Quick Key - Siemens MJ-4A Installation And Operation Manual

4
Setting Up the MJ-4A & MJ-4B Control Panel
4.10

Setting up the Quick Key

The Quick Key provides access to the customizable Quick
List. The Quick List can be used to step through a series
of up to 15 user-set menu items. The Quick List allows
creation of a custom menu with the minimal amount of
effort. Any changes to the menu parameters must be
done using normal configuration and operation proce-
dures. Certain menus cannot be added to the Quick List
including: Password Menu, Log Menu(s), Alert Menu.
Adding Items to the Quick List: Use the scroll keys to dis-
play the desired menu item to be added. Press the +/- key.
Press the Quick Key. Repeat to add more screens to the
Quick List. Items are stored in the order that you add
them.
Removing Items from the Quick List: Press the Quick Key
repeatedly to display the desired menu item to be
removed. Press the +/- key. Press the Quick Key. Press the
Cancel/Reset key.
Viewing the position of Items in the Quick List: Press the
Quick Key repeatedly to display the desired menu item.
Press the left arrow key to display the item's position in
the menu stack.
Repositioning Items in the Quick List: Press the Quick Key
repeatedly until the desired item is displayed. Press the
Change Key. Press the Up and Down arrow keys to move
the item up and down one position at a time. When fin-
ished, no further key presses are necessary. Press the
Quick Key repeatedly to cycle through the new order.
Displaying Items in the Quick List: Press the Quick Key
repeatedly to step through the Quick List. The display will
flash from bright to dim to signify that the Quick List is
being displayed. When finished, press the Cancel/Reset
key to exit the Quick List, or if no keys are pressed for the
amount of time specified in the Quick t.o. data item, the
Quick List will be automatically exited.
The first keypress used to enter the Quick List will always
display the Tap Contr screen (showing switch position)
before the actual Quick List is displayed itself.
While in the Quick List, press the right arrow key to begin
a slideshow that automatically steps through the Quick
List. Each screen is displayed for the amount of time spec-
ified by the QuickDispTim data item. To stop the slide-
show and exit the Quick List press the Cancel/Reset key.
38 Siemens Energy, Inc.