2.4.2 Viewing Stored Recordings
1. Set the rotary switch to MR.
2. The instrument displays the last recording stored in the instrument. The secondary (top) display indicates the
memory location; while the main display indicates the measured value.
To see the other measurements, press the
measurement is displayed.
3. To scroll rapidly through the recorded measurements, keep the
4. To select a specific recording, use the
5. Once you select the recording number, you can see all information associated with the measurement. Press the
MEM button for >2 seconds, then use the
6. When finished viewing recordings, press MEM for >2 seconds.
26
1.800.561.8187
OFF
V
Ω
Ω
k
MR -
MEM
button. The record number is decremented and the corresponding
button to change the recording number.
button to scroll the information.
www.
.com
Ω
M
50V
100V
250V
500V
1000V
M
button pressed.
Megohmmeter Model 6526/6532/6534
information@itm.com