AEMC 6526 User Manual page 3

Thank you for purchasing the Megohmmeter Model 6526, 6532, or 6534.
For best results from your instrument:
■ Read these operating instructions carefully
■ Comply with the precautions for use
WARNING, risk of DANGER! The operator must refer to these instructions whenever this danger symbol
appears
WARNING, risk of electric shock. The voltage applied to parts marked with this symbol may be hazardous
Equipment is protected by double insulation
The voltage on the terminals must not exceed 700V
> 700V
Ground/Earth
Battery
Information or useful tip
Remote test probe
The product is recyclable in accordance with standard ISO14040
This instrument exceeds regulatory requirements with respect to recycling and reuse
Indicates conformity with European directives, in particular LVD and EMC
Indicates that, in the European Union, the instrument must undergo selective disposal in compliance with Direc-
tive WEEE 2002/96/EC. This instrument must not be treated as household waste
Definition of Measurement Categories (CAT)
■ CAT II corresponds to measurements taken on circuits directly connected to low-voltage installations.
Example: power supply to electro-domestic devices and portable tools.
■ CAT III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
■ CAT IV corresponds to measurements taken at the source of low-voltage installations.
Example: power feeders and protection devices.
1.800.561.8187
www. .com
information@itm.com