Voltage Present During A Continuity, Resistance, Or Capacitance Measurement (Models 6526 And 6532); Memory Full; Resetting The Instrument - AEMC 6526 User Manual

5.2.1.3 Voltage present during a continuity, resistance, or capacitance measurement
(Models 6526 and 6532)

5.2.1.4 Memory full

MEM

5.2.2 Resetting the Instrument

You can reset your instrument at any time. To do this:
1. Press the ▲ and
2. Turn the rotary switch to any setting other than OFF.
3. The instrument reboots.
Megohmmeter Model 6526/6532/6534
1.800.561.8187
If during a continuity, resistance, or capacitance measurement the instrument
detects an external voltage in excess of 15V (AC or DC), it interrupts the measure-
ment and displays the screen show to the left.
You must eliminate the voltage to resume the measurement.
When the memory is full, the instrument displays the screen shown to the left. You
must remove one or more recordings before new recordings can be saved (see §
2.3.3).
buttons simultaneously.
www.
information@itm.com
.com
43