Recording Data; Recording A Measurement - AEMC 6526 User Manual

2. Connect the system to be tested to the instrument. The device to be tested must be powered down and
discharged.
3. The instrument displays the capacitance and (Model 6532) the corresponding line length, computed from the
configured capacitance per unit length: Length = capacitance / capacitance per unit length.

2.4 Recording Data

2.4.1 Recording a Measurement

A measurement can be stored in the instrument's memory if the measurement is:
■ "Frozen" on the LCD via the HOLD button (§ 2.1.5)
■ The result of a timed test (§ 2.2.2.2)
To save the measurement, press the MEM button for >2 seconds. The measurement is stored in the first

available record in the instrument's memory.
The saved recording includes all information associated with the measurement, including voltage, current,
> 2s
duration of tests, T1 and T2 (for PI and DAR), and other data. The recording also includes a bar graph indi-
cating how much available memory remains in the instrument.
Megohmmeter Model 6526/6532/6534
1.800.561.8187
MEM
www. .com
k nF/ km
G nF
M
information@itm.com
25