5.5 PRINTING DATA IN MEMORY (PRINT MEM BUTTON)
(Not Available for Model 5060 with USB Port)
Prints out the contents of the instrument's read-write memory.
The small display indicates 01 : 01 for the OBJ : TEST number (starting address
of printing).
The main display indicates the last recording in memory (the end address of
printing) e.g. 12 : 06.
01 flashes opposite the OBJ position (use the ► and
start/end addresses of the printout).
■ To exit without printing, alter the position of the selector switch.
■ To proceed with printing, press the PRINT button once more.
■ To stop printing, alter the position of the selector switch.
Only the main results are printed out.
Example:
AEMC
Instruments Model 5060
®
Instrument number: 000 001
34
buttons to define the
Megohmmeter Models 5050 & 5060