Yamaha FJR13AEV(C) Service Manual page 647

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM (FJR13AE only)
Diagnostic code table
Diagnos-
tic code Item
No.
Sh_ _61 Malfunction history
code display
• No history
• History exists
Sh_ _62 Malfunction history
code erasure
• No history
• History exists
Data displayed on
meter (reference
value)
Sh_ _61 —
Fault code numbers If fault codes are stored in the malfunction
Sh_ _11–Sh_ _52 history, the hand shift select indicator light
• (First displays Sh_ will come on.
_61 for 6 seconds,
and then displays
each fault code
number that is
stored in the mal-
function history.
If more than one
code number is
detected, the dis-
play alternates ev-
ery two seconds
to show all the de-
tected code num-
bers.
When all of the
code numbers
have been shown,
the display re-
peats the same
process.)
Sh_ _62 —
01-09 • If fault codes are stored in the malfunc-
• First displays Sh_ tion history, the hand shift select indicator
_62 for 6 seconds, light will come on.
and then displays To erase the history, set the engine stop
the total number
switch from " " to "
of malfunctions,
After the history is erased, the hand shift
including the cur-
select indicator light will go off.
rent malfunction,
that have oc-
curred since the
history was last
erased.
• If there are nine or
more of fault
codes stored in
the malfunction
history, "09" is dis-
played.
8-176
Checking method
".