Yamaha FJR13AEV(C) Service Manual page 367

Hide thumbs Also See for FJR13AEV(C):
Table of Contents

Advertisement

2. Fill:
• Clutch master cylinder reservoir
(with the specified amount of the recom-
mended clutch fluid)
Recommended fluid
DOT 4
EWA13370
WARNING
• Use only the designated clutch fluid. Other
clutch fluids may cause the rubber seals to
deteriorate, causing leakage and poor
clutch performance.
• Refill with the same type of clutch fluid that
is already in the system. Mixing clutch flu-
ids may result in a harmful chemical reac-
tion, leading to poor clutch performance.
• When refilling, be careful that water does
not enter the clutch fluid reservoir. Water
will significantly lower the boiling point of
the clutch fluid and could cause vapor lock.
ECA13420
CAUTION:
Clutch fluid may damage painted surfaces or
plastic parts. Therefore, always clean up any
spilt clutch fluid immediately.
NOTE:
In order to ensure a correct reading of the clutch
fluid level, make sure that the top of the reservoir
is horizontal.
3. Bleed:
• Clutch system
Refer to "BLEEDING THE HYDRAULIC
CLUTCH SYSTEM (FJR13A)" on page 3-18
and "BLEEDING THE HYDRAULIC
CLUTCH SYSTEM (FJR13AE)" on page
3-19.
4. Check:
• Clutch fluid level
Below the minimum level mark "a" → Add the
recommended clutch fluid to the proper level.
Refer to "CHECKING THE CLUTCH FLUID
LEVEL (FJR13A)" on page 3-17 and
"CHECKING THE CLUTCH FLUID LEVEL
(FJR13AE)" on page 3-17.
A. FJR13A
B. FJR13AE
5. Check:
• Clutch lever operation
Soft or spongy feeling → Bleed the clutch
system.
Refer to "BLEEDING THE HYDRAULIC
CLUTCH SYSTEM (FJR13A)" on page 3-18
and "BLEEDING THE HYDRAULIC
CLUTCH SYSTEM (FJR13AE)" on page
3-19.
5-66
CLUTCH

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fjr13av(c)

Table of Contents