Installing The Middle Drive Shaft Assembly - Yamaha FJR13AEV(C) Service Manual

Bearing retainer
110 Nm (11.0 m·kg, 80 ft·lb)
1
d. Lock the threads with a drift punch.
L LLL L LLL L L LLL L L LLL L
2. Tighten:
• Middle driven pinion gear nut
M MMM M MMM M M MMM M M MMM M
a. Tighten the middle driven pinion gear nut to
specification.
Middle driven pinion gear nut
110 Nm (11.0 m·kg, 80 ft·lb)
®
LOCTITE
NOTE:
Secure the middle driven shaft in a vise, making
sure to tighten the vise jaws onto the flat sec-
tions of the shaft.
b. Lock the threads with a drift punch.
L LLL L L LLL L LLL
New
M MMM M M MMM M MMM
5-89
L LLL L LLL L L LLL L L LLL L
EAS25860
INSTALLING THE MIDDLE DRIVE SHAFT
ASSEMBLY
1. Tighten:
• Bearing retainer "1"
M MMM M MMM M M MMM M M MMM M
a. Attach the bearing retainer wrench "2".
Bearing retainer wrench
90890-04137
Middle drive shaft bearing retain-
er wrench
YM-04137
b. Tighten the bearing retainer to specification.
Bearing retainer
110 Nm (11.0 m·kg, 80 ft·lb)
c. Lock the threads with a drift punch.
L LLL L LLL L L LLL L L LLL L
2. Install:
New
• Lock washer "1"
• Middle drive pinion gear nut "2"
MIDDLE GEAR
L LLL L L LLL L LLL
New
M MMM M M MMM M MMM
L LLL L L LLL L LLL