Yamaha FJR13AEV(C) Service Manual page 607

Hide thumbs Also See for FJR13AEV(C):
Table of Contents

Advertisement

ABS (ANTI-LOCK BRAKE SYSTEM)
NOTE:
Do not delete the malfunction codes during the troubleshooting procedures. Be sure to delete the codes
when the service is finished.
EW3P61011
WARNING
When maintenance or checks have been performed on components related to the ABS, be sure
to perform a final check before delivering the vehicle to the customer. (Refer to "[D-3] FINAL
CHECK" on page 8-157.)
EAS27830
[A] CHECKING THE ABS WARNING LIGHT
Turn the main switch to "ON". (Do not start the engine.)
1. The ABS warning light does not come on. [B-1]
2. The ABS warning light remains on. [B-2]
3. The ABS warning light flashes. [B-3]
4. The ABS warning light comes on for 2 seconds, then goes off. [B-4]
ET3P61061
[B-1] THE ABS WARNING LIGHT DOES NOT COME ON
1. Only the ABS warning light fails to come on when the main switch is turned to "ON". [C-1]
2. The ABS warning light and all other indicator lights fail to come on. [C-2]
3. The ABS warning light fails to come on while the start switch is being pushed. [C-3]
ET3P61062
[B-2] THE ABS WARNING LIGHT REMAINS ON
1. A present malfunction is detected. [B-5]
2. The ABS warning light remains on. [C-6]
ET3P61063
[B-3] THE ABS WARNING LIGHT FLASHES
1. The ABS warning light flashes. [C-4]
2. The ABS warning light flashes every 0.5 second. [C-5]
EAS27860
[B-4] MALFUNCTION CHECK BY THE ABS SELF-DIAGNOSIS (PAST MALFUNCTION)
Remove front cowling right inner panel 1 to access the ABS test coupler "1". Remove the protective cap
from the ABS test coupler, and then connect the test coupler adapter "2" to the coupler. The T/C termi-
nal (sky blue) is now grounded.
1
8-136

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fjr13av(c)

Table of Contents