Yamaha FJR13AEV(C) Service Manual page 38

Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
The display shows the distance that can be trav-
eled on 1.0 US.gal of fuel under the current
riding conditions.
1.
NOTE:
If traveling at speeds under 10 km/h (6.0 mi/h),
"_ _._ " will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel consump-
tion since it was last reset.
When the average fuel consumption mode is se-
lected, the display flashes for five seconds, and
then "AV _ _._ MPG" (average distance that can
be traveled using 1.0 US.gal of fuel) is displayed.
1.
NOTE:
• To reset the average fuel consumption display,
push the "RESET" button to select the mode
again, and then push the "RESET" button for 1
second while the display is flashing.
• After resetting an average fuel consumption
display, "_ _._ " will be shown for that display
until the vehicle has traveled 1 km (0.6 mi).
EC3P66002
CAUTION:
If there is a malfunction, "– –.–" will be dis-
played. Replace the meter assembly.
Self-diagnosis device
1. Fault code display
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If any of those circuits are defective, the multi-
function display will indicate a two-digit fault
code (e.g., 11, 12, 13).
If the multi-function display indicates such an
fault code, note the code number, and check the
vehicle.
Refer to "FUEL INJECTION SYSTEM" on page
8-57.
EC3P61042
CAUTION:
If the multi-function display indicates an fault
code, the vehicle should be checked as soon
as possible in order to avoid engine damage.
1-29
FEATURES