Yamaha FJR13AEV(C) Service Manual page 311

NOTE:
Tighten the pinch bolts (rear side) one at a time,
making sure to tighten the first bolt again after
tightening the second bolt.
11.Tighten:
• Engine mounting bolts (top) "15"
(temporarily tighten)
• Engine bracket bolts (top) "13"
(temporarily tighten)
NOTE:
When temporarily tightened, the bolts "15" and
"13" should be flat against the engine and frame
surface.
12.Tighten:
• Engine mounting bolts (top) "15"
• Engine bracket bolts (top) "13"
Engine mounting bolt (top)
37 Nm (3.7 m·kg, 27 ft·lb)
Engine bracket bolt (top)
16 Nm (1.6 m·kg, 11 ft·lb)
8
1
14
4 11
5
6
13
15
13
10
9
2
13
15
13
5-10
ENGINE REMOVAL
13.Install:
• Engine bracket (left rear side) "1"
• Engine bracket bolt (left rear side) "2"
• Engine mounting bolts (left rear side) "3"
NOTE:
Do not fully tighten the bolts.
14.Tighten:
• Engine bracket bolt (left rear side) "2"
Engine bracket bolt (left rear
side)
32 Nm (3.2 m·kg, 23 ft·lb)
15.Tighten:
• Engine mounting bolts (left rear side) "3"
Engine mounting bolt (left rear
side)
16 Nm (1.6 m·kg, 11 ft·lb)
1
3
16.Install:
• Brake pedal "1"
Brake pedal pinch bolt
8 Nm (0.8 m·kg, 5.8 ft·lb)
NOTE:
Align the punch mark "a" on the brake pedal with
the punch mark "b" on the brake pedal pivot
shaft.
2
1
a
b